Siemens SINUMERIK 828D Programming Manual page 4

Preface
Standard scope
This Programming Guide describes the functionality afforded by standard functions.
Extensions or changes made by the machine tool manufacturer are documented by the
machine tool manufacturer.
Other functions not described in this documentation might be executable in the control.
This does not, however, represent an obligation to supply such functions with a new control
or when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case of
installation, operation or maintenance.
Technical Support
If you have any questions, please contact our hotline:
Phone
Fax
Internet
Phone
Fax
E-mail
Phone
Fax
E-mail
Note
You will find telephone numbers for other countries for technical support on the Internet:
http://www.automation.siemens.com/partner
4
+49 (0) 911 895 7222
+49 (0) 911 895 7223
http://www.siemens.de/automation/support-request
+1 423 262 2522
+1 423 262 2200
mailto:techsupport.sea@siemens.com
+86 1064 757 575
+86 1064 747 474
mailto:support.asia.automation@siemens.com
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Europe / Africa
America
Asia/Pacific
Fundamentals