Siemens SINUMERIK 828D Programming Manual page 465

Operation Meaning
CT Circle with tangential transition
CTAB Define following axis position according
to leading axis position from curve table
CTABDEF Table definition ON
CTABDEL Clear curve table
CTABEND Table definition OFF
CTABEXISTS Checks the curve table with number n
CTABFNO Number of curve tables still possible in
the memory
CTABFPOL Number of polynomials still possible in
the memory
CTABFSEG Number of curve segments still possible
in the memory
CTABID Returns table number of the nth curve
table
CTABINV Define leading axis position according to
following axis position from curve table
CTABISLOCK Returns the lock state of the curve table
with number n
CTABLOCK Delete and overwrite, lock
CTABMEMTYP Returns the memory in which curve
table number n is created
CTABMPOL Max. number of polynomials still
possible in the memory
CTABMSEG Max. number of curve segments still
possible in the memory
CTABNO Number of defined curve tables in
SRAM or DRAM
CTABNOMEM Number of defined curve tables in
SRAM or DRAM
CTABPERIOD Returns the table periodicity of curve
table number n
CTABPOL Number of polynomials already used in
the memory
CTABPOLID Number of the curve polynomials used
by the curve table with number n
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
W Description see
1) 2)
PGsl
m
Circular interpolation with tangential transition (CT, X...
Y... Z...) (Page 233)
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
FB3(M3)
PGAsl
PGAsl
PGAsl
PGAsl
Tables
16.1 Instructions
465