EM Tracking Unit Setup
5.2.3
Connecting EM Tracking Unit to Monitor Cart
How to Connect the EM Tracking Unit to the Monitor Cart
Steps
1.
2.
3.
4.
5.
Turning the EM Tracking Unit On
When the EM Tracking Unitand Monitor Cart are connected, the EM Tracking Unit is powered
on as soon as the Monitor Cart is turned on (see page 96).
84
②
①
Ensure that Monitor Cart is turned off.
Connect the data plug of the EM cable to the navigation system port of the EM Base Sta-
tion ②.
Connect the power plug of the EM cable to the power port of the EM Base Station ①.
To connect to Curve Monitor Cart:
• Connect the USB cable to the blue labeled USB connector ③ on the Curve Monitor
Cart User Panel
• Connect the EM power connector to the camera port on Curve Monitor Cart Connec-
tion Panel ④
Connect mains power to Monitor Cart and wall power outlet.
Figure 36
③
System User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
④