Ceiling Mount Installation; How To Mount The Flat Panel Detector Systems - Brainlab ExacTrac Planning Manual

Ceiling Mount Installation

5.2 Ceiling Mount Installation
5.2.1

How to Mount the Flat Panel Detector Systems

General Installation Information
Component
Weight
Factor of safety
Bolts required
Mounting accuracy for Infrared
Camera System
Mounting accuracy for Flat Panel
Detector System
50
Description
50 kg
Four (construction must carry 200 kg)
Six (two for the ceiling bracket, four for support cables)
Use the 17 mm hole to attach the angle to the ceiling.
60mm
Ø18mm
Ceiling Bracket
The interface plate has the same orientation as the vertical
profile bar is. The slots are perpendicular to the center line.
If there are pipes, HVAC, med gas, or other fixed objects ob-
structing the mounting position, the ExacTrac ceiling mount
may not be moved closer to isocenter, but can be adjusted at
a maximum of 30 mm further away from isocenter.
Furthermore the brackets (ceiling plate) may be rotated for
90°. Otherwise, items that impede the installation of the flat
panel ceiling brackets must be re-routed or moved.
The Interface Plate must be attached to the profile at a 45°
angle. The slots of the plate are perpendicular to the line to-
wards the isocenter.
Site Planning Manual Rev. 1.0 ExacTrac Ver. 6.x
88mm
Rope Ceiling Angle