Watchdog Settings; Welding System Time - Kemppi A7 350 Integration Manual

5.1.8 Watchdog settings

Watchdog
If your robot supports the watchdog functionality, select
the watchdog ON. Otherwise, set this feature OFF.
Timeout
Specify a timeout for the watchdog timer by using the
slider. The minimum timeout value is 0.1 s
is 5.0 s. This timeout value specifies how fast the welding
system stops welding if the robot stops sending fieldbus
data. The robot must perform continuous transitions on
the Watchdog signal of the digital robot interface within
the timeout period.

5.1.9 Welding system time

Set the welding system time and date by picking up the
date from the pop-up calendar and typing the time to the
particular field. If you want to synchronize the welding
system time with the time of the browser, press the
button.
After configuring the welding system settings, click on the
and maximum Save button, in the bottom bar, to save all changes.
© Kemppi Oy 2020
NOW
25
A7 MIG Welder 2002