Replacing A Wifi Converter - Huawei FusionModule5000 Smart Modular Data Center Maintenance Manual

SmartDC
Maintenance Guide
Figure 6-35 Removing the smart ETH gateway
Step 4 Install the reserved smart ETH gateway in the original position and connect the cables.
Step 5 On the WebUI of the ECC800-Pro, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 6 Log in to the ECC800-Pro WebUI, and edit the plan view by adding new devices.
Step 7 Check the parameters and communication status of the smart ETH gateway to ensure normal
communication.
----End

6.4.6 Replacing a WiFi Converter

Impact on the System
The app cannot be connected.
Preparations


Procedure
Step 1 Label each cable based on the corresponding ports on the WiFi converter.
Step 2 Remove the cables and antenna from the WiFi converter.
Step 3 Remove the failure WiFi converter from the guide rails.
Issue 04 (2020-03-25)
Tools: ESD wrist strap, ESD gloves, step ladder, labels, marker
Material: WiFi converter
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
72