Replacing A Button - Huawei FusionModule5000 Smart Modular Data Center Maintenance Manual

SmartDC
Maintenance Guide

6.4.4.3 Replacing a Button

Context



Impact on the System
The faulty button cannot be used.
Preparations


Procedure
Step 1 Remove the button.
1.
2.
3.
Figure 6-22 Removing the button
Issue 04 (2020-03-25)
The light button and door open button (green) can reset automatically. Both BOM
numbers are 16050101.
The emergency button (red) needs to be manually reset. Its BOM number is 16050102.
The door open button, emergency button, and light button are replaced in the same way.
Tool: socket wrench
Material: door open button, emergency button, or light button
Lift the side panel of the door post.
Remove the side panel of the door post outwards.
Remove the button connection cable, the nut on the button installation position, and then
the button.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
62