SmartDC
Maintenance Guide
Figure 6-32 Adjusting the gap
----End
6.4.4.6 Replacing a Door Status Sensor
Impact on the System
The cabinet door status cannot be detected.
Preparations
Procedure
Step 1 Remove the cover of the door status sensor manually.
Step 2 Remove the communications cable using a Phillips screwdriver and apply insulation measures
such as wrapping the cable with insulation tape to avoid hazards.
Step 3 Remove the door status sensor from the rack top using the Phillips screwdriver, as shown in
Figure
Issue 04 (2020-03-25)
Tools: Phillips screwdriver, insulation tape
Material: door status sensor
6-33.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
69