Huawei FusionModule5000 Smart Modular Data Center Maintenance Manual page 97

SmartDC
Maintenance Guide
Figure 6-55 Removing a pad power connector from its holder (BOM number: 14190242)
Step 7 Assemble the pad power connector holder.
1.
2.
Figure 6-56 Assembling a pad power connector holder (BOM number: 14190892)
Figure 6-57 Assembling a pad power connector holder (BOM number: 14190242)
Issue 04 (2020-03-25)
Clamp the power connector to the guide rail of the holder.
Install the holder cover using three M4x12 screw assemblies.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
90