Read A Preset's Name; Read An Input's Name; Read An Output's Name; Reload Default Preset Names - Lightware UMX4x4-Pro2 User Manual

Query names of Presets / Inputs / Outputs
Description: Each preset / input / output name can be read from the router.

8.8.16. Read a preset's name

Command {PNAME#<id>=?}
Response (PNAME#<id>=<preset_name>)CrLf ← (PNAME#1=FIRST PRESET)CrLf
Explanation: Name for preset 1 is "FIRST PRESET".

8.8.17. Read an input's name

Command {INAME#<in>=?}
Response (INAME#<in>=<input_name>)CrLf
Explanation: Name for input 3 is "MEDIA PLAYER".

8.8.18. Read an output's name

Command {ONAME#<out>=?}
Response (ONAME#<out>=<output_name>)CrLf ← (ONAME#2=MONITOR_NO2)CrLf
Explanation: Name for output 2 is "MONITOR_NO2".
Set default names of Presets / Inputs / Outputs
Description: Renames all preset / input / output names to the default: Preset 1..32 /
Input 1..4 / Output 1..4 respectively.
Info: The <id> field is not relevant here, only has to be a valid one. The command will affect
ALL Presets / Inputs / Outputs disregarding the actual number that was in the command.

8.8.19. Reload default preset names

Command {PNAME#<id>=!}
Response (PNAME#<id>=Preset●<id>)CrLf ← (PNAME#2=Preset 2)CrLf
Explanation: All preset names are set to default: "Preset 1", "Preset 2", and so on.

8.8.20. Reload default input names

Command {INAME#<id>=!}
Response (INAME#<id>=Input●<id>)CrLf
Explanation: All input names are set to default: "Input 1", "Input 2", and so on.

8.8.21. Reload default output names

Command {ONAME#<id>=!}
Response (ONAME#<id>=Output●<id>)CrLf ← (ONAME#3=Output 3)CrLf
Explanation: All output names are set to default: "Output 1", "Output 2", and so on.
Section 8. Programmers reference
Format
Format
Format
Format
Format
Format
Example
→ {pname#1=?}
Example
→ {iname#3=?}
← (INAME#3=MEDIA PLAYER)CrLf
Example
→ {oname#2=?}
Example
→ {pname#2=!}
Example
→ {iname#4=!}
← (INAME#4=Input 4)CrLf
Example
→ {oname#3=!}
UMX4x4-Pro2
User's Manual
Page 99 / 136