Reset Analog Timing Properties; Set Analog Color Properties - Lightware UMX4x4-Pro2 User Manual

8.10.6. Reset analog timing properties

Description: This command resets the analog timing properties.
Command {:ANALOG#<in>@<S/A>I=RESET} → {:analog#4@si=reset}
Response
Legend:

8.10.7. Set analog color properties

Description: Set analog color properties of the input ports.
Command {:PICTURE#<in>@<S/A>I=
Response
Legend:
Info: Analog color setting will not be saved automatically. User can save it with the next
command.
Page 106 / 136
Format
(ANALOG#<in>@<S/A>I=
<PHS>;
<FHS>;
<HS>;
<VS>;
<HP>;
<VP>;
<LCF>;
<FORM>;
<VSP>;
<HSP>;
<FPS>)CrLf
Please read section 8.10.4.
Format
<DF_CHA>;<DF_CHB>;<DF_CHC>;
<G_CHA>;<G_CHB>;<G_CHC>;
<O_CHA>;<O_CHB>;<O_CHC>;
<CONT>;<SAT>;<BRIGHT>;<HUE>;)
(PICTURE#<in>@<S/A>I=
<DF_CHA>;<DF_CHB>;<DF_CHC>;
<G_CHA>;<G_CHB>;<G_CHC>;
<O_CHA>;<O_CHB>;<O_CHC>;
<CONT>;<SAT>;<BRIGHT>;<HUE>;)CrLf
<S/A>: Affected ports:
S = single selected input
A = all inputs
<DF_CHA> Digital fine-clamp for CH-A:
<DF_CHB> Digital fine-clamp for CH-B:
<DF_CHC> Digital fine-clamp for CH-C:
<G_CHA> Gain for CH-A:
<G_CHB> Gain for CH-B:
<G_CHC> Gain for CH-C:
<O_CHA> Offset for CH-A:
<O_CHB> Offset for CH-B:
<O_CHC> Offset for CH-C:
<CONT> Contrast:
<SAT> Saturation:
<BRIGHT> Brightness:
<HUE> Hue:
← (ANALOG#4@SI=
0;
2640;
1920;
1080;
192;
41;
1124;
P;
+;
-;
50;)CrLf
(Set analog timing properties)
→ {:picture#3@si=
1023;1023;1023;
1023;1023;1023;
1023;1023;1023;
128;128;0;0;}
← (PICTURE#3@SI=
1023;1023;1023;
1023;1023;1023;
1023;1023;1023;
128;128;0;0;)CrLf
0-4096
0-4095
0-4095
0-1023
0-1023
0-1023
0-1023
0-1023
0-1023
0-255
0-255
0-255
0-127
Section 8. Programmers reference
Example
Example