Introduction; General Description; Box Contents; Features - Lightware UMX4x4-Pro2 User Manual

1. Introduction

Dear Customer,
Thank you for choosing Lightware UMX4x4-Pro2 matrix switcher. It is able to switch 4
inputs to 4 outputs in a non-blocking crosspoint configuration.
The UMX4x4-Pro2, the all-round universal matrix switcher, is the perfect solution for ever-
changing environments such as small board rooms and classrooms. UMX (Universal
MatriX) technology was developed by Lightware to support various analog and digital
audio visual formats. VGA, YUV, digital DVI, HDMI with HDCP, stereo analog and S/PDIF
digital audio signals are all supported.

2. General description

2.1.

Box contents







2.2.

Features

 Advanced EDID Management – The user can emulate any EDID on the switcher's
 Non-blocking cross point matrix architecture – The router allows any input to be
 2.25 Gb/s channel transmission – Routes any DVI single link or HDMI signal between
 Supports all HDTV resolutions – 720p, 1080i, 1080p 2K etc. HDTV signals up to 225
 Control by front panel buttons – 4 source select, 4 destination select, Video layer,
 Reconfigurable buttons – Each button has a removable flat cap and a translucent label
 RS-232 control – Simple ASCII based RS-232 protocol is used for switching, preset
 Ethernet control – TCP/IP Ethernet 10Base-T or 100Base-TX (Auto- Sensing).
 Built-in WEB site – Easy access from a WEB browser to control and configure the
Section 1. Introduction
UMX4x4-Pro2 matrix switcher
IEC power cable
LAN UTP crosslink cable, CAT5e type, 3m length
RS-232 straight serial cable (9 pole D-sub Male to Female)
VGA to DVI-D adapter cable (4 pcs.)
User's manual (this document)
inputs independently, read out and store any attached monitor's EDID
in the internal memory locations, upload and download EDID files
using Lightware Device Controller.
switched to any output or more outputs simultaneously.
25 and 225 MHz pixel clock frequency conforming to DVI 1.0 and
HDMI1.3 standards.
MHz pixel clock frequency regardless of the actual resolution passed
through the router.
Audio layer, Take, Load preset, Save preset, EDID function, Signal
present, Control Lock, Output Lock.
that can be inserted under the cap to identify sources and
destinations.
calling, status request, etc.
switcher.
UMX4x4-Pro2
User's Manual
Page 9 / 136