Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Otto Bock Genium Series Instructions For Use Manual

Use
• If the settings of a MyMode are to be modified, one must first switch to this MyMode.

9.2.1 Changing the prosthesis setting using the cockpit app

Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info

9.2.2 Overview of adjustment parameters in basic mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait cycle. These para­
meters act as basic settings for automatically adjusting the damping behaviour to the current motion situation (e.g.
ramps, slow walking speed, etc.).
The stance function, sitting function and/or stairs and obstacles function can also be activated/deactivated. Further
information on the stance function (see Page 89), sitting function (see Page 91), stairs and obstacles function (see
Page 91).
The following parameters can be modified:
Parameter
Resistance
Angle
Stance function
Sitting function
Stair Function
94
1) Once the component is connected and in the desired mode, tap the
symbol in the main menu.
→ The navigation menu opens.
2) Tap the menu entry "Settings".
change
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
2. Golf
symbols.
INFORMATION: The prosthetist's setting is marked and, after the
setting has been changed, can be restored by tapping the "Stand­
ard" button.
Adjustment soft­
ware range
120 – 180
55° – 70°
Deactivated
Activated
Deactivated
Activated
Deactivated
Activated
Setting range, Meaning
app
+/- 10 Resistance against flexion motion e.g. when
walking down stairs or when sitting down
+/- 3° Maximum flexion angle in the swing phase
0 - deactivated Activation/deactivation of the stance function.
1 - activated For switching with the Cockpit app, this func­
tion has to be activated in the adjustment
software. Further information (see Page 89).
0 - deactivated Activation/deactivation of the sitting function.
1 - activated For switching with the Cockpit app, this func­
tion has to be activated in the adjustment
software. Further information (see Page 91).
0 - deactivated Activating/deactivating the stair and obstacle
1 - activated function. For switching with the Cockpit app,
this function has to be activated in the adjust­
ment software. Further information (see
Page 91).