Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Otto Bock 1B1-2 Meridium Instructions For Use Manual

• The O&P professional's setting is located in the middle of the scale. After making adjustments, this setting can
be restored by tapping the "Standard" button in the Cockpit app.
• Prosthesis settings should be optimised using the adjustment software. The Cockpit app is not intended for
use by the O&P professional to set up the prosthesis. The patient can use the app to change the behaviour of
the prosthesis to a certain extent during everyday use (e.g. while becoming accustomed to the prosthesis). The
O&P professional can use the adjustment software to trace these changes at the patient's next appointment.
• If the settings of a MyMode are to be modified, one must first switch to this MyMode.

9.4.1 Changing the prosthesis setting using the cockpit app

6
Product
MyModes
Functions
Heel Height
Settings
Status
General
Manage components
Imprint/Info

9.4.2 Overview of adjustment parameters in basic mode

The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait cycle. These para­
meters act as basic settings for automatically adjusting the damping behaviour to the current motion situation (e.g.
ramps, slow walking speed, etc.).
The following parameters can be modified:
Parameter
Pitch
Volume
Heel Resist.
Rollover Resist.
Stair Function
1B1-2=* Meridium
1) Once the component is connected and in the desired mode, tap the
symbol in the main menu.
→ The navigation menu opens.
2) Tap the "Settings" menu option.
change
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
2. Golf
symbols.
INFORMATION: The O&P professional's setting is marked and,
after the setting has been changed, can be restored by tapping
the "Standard" button.
Adjustment soft­
ware range
1000 Hz–4000 Hz 1000 Hz–4000 Hz Pitch (frequency) of beep signal for confirma­
0–4
10–60
110–170
ON–OFF
Setting range, Meaning
app
tion tones
0–4 Volume of beep signal for confirmation tones
(e.g. when checking the charge level, switch­
ing MyModes).
The "0" setting deactivates the audible feed­
back signals. However, warning signals are
still generated when errors occur (see
Page 34).
± 20 Plantar flexion damping.
How fast the forefoot is lowered when weight
is placed on the heel.
± 10 This parameter defines how easy the rollover
is.
ON–OFF Switching on this function increases the
rollover angle when walking down stairs. In
Use
27