Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Otto Bock Genium X3 3B5-3 Instructions For Use Manual

8.2.1 Changing the prosthesis setting using the cockpit app

8.2.1.1 Overview of adjustment parameters in basic mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait
cycle. These parameters act as basic settings for automatically adjusting the damping behaviour
to the current motion situation (e.g. ramps, slow walking speed, etc.).
The stance function, sitting function and/or stairs and obstacles function can also be activ­
ated/deactivated. Further information on the stance function (see page 74), sitting function (see
page 76), stairs and obstacles function (see page 76).
The following parameters can be modified:
Parameter
Resistance
Angle
Stance function
1) Once the component is connected and in the desired mode,
tap the icon in the main menu.
→ The navigation menu opens.
2) Tap the "Settings" menu option.
→ A list appears with the parameters for the currently
selected mode.
3) Change the setting of the desired parameter by tapping the
"<", ">" icons.
INFORMATION: The O&P professional's setting is
marked and, after the setting has been changed, can be
restored by tapping the "Standard" button.
Adjustment Setting
software range, app
range
120 – 180 +/- 10
55° – 70° +/- 3°
Deactivated 0 - deactivated
Activated 1 - activated
Meaning
Resistance against flexion motion e.g.
when walking down stairs or when sit­
ting down
Maximum flexion angle in the swing
phase
Activation/deactivation of the stance
function. For switching with the Cock­
pit app, this function has to be activ­
ated in the adjustment software. Fur­
ther information (see page 74).
79