Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Otto Bock Genium 3B1 Instructions For Use Manual

Use
• It is not possible to change prosthesis settings nor to switch to a different mode while the prosthesis battery is
being charged. Only the status of the prosthesis can be called up. Instead of the
appears in the bottom row of the screen in the cockpit app.
• The prosthetist's setting is located in the middle of the scale. After making adjustments, this setting can be
restored by tapping the "Standard" button (Cockpit app) or by moving the slider control into the middle
(remote control).
• Prosthesis settings should be optimised using the adjustment software. The cockpit app or remote control
(optional accessory) is not intended for use by the prosthetist in order to set up the prosthesis. The day-to-day
behaviour of the prosthesis can be changed to a certain degree by the patient with the remote control or app
(e.g. as they become accustomed to the prosthesis). The prosthetist can use the adjustment software to trace
these changes at the patient's next appointment.
• If the settings of a MyMode are to be modified, one must first switch to this MyMode.

10.3.1 Changing the prosthesis setting using the cockpit app

Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info

10.3.2 Overview of adjustment parameters in basic mode

The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait cycle. These para­
meters act as basic settings for automatically adjusting the damping behaviour to the current motion situation (e.g.
ramps, slow walking speed, etc.).
The stance function, sitting function and/or stairs and obstacles function can also be activated/deactivated. Further
information on the stance function (see Page 75), sitting function (see Page 76), stairs and obstacles function (see
Page 77).
The following parameters can be modified:
Parameter
Resistance
Angle
Stance function
82 | Ottobock
1) Once the component is connected and in the desired mode, tap the
symbol in the main menu.
→ The navigation menu opens.
2) Tap the menu entry "Settings".
change
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
2. Golf
symbols.
INFORMATION: The prosthetist's setting is marked and, after the
setting has been changed, can be restored by tapping the "Stand­
ard" button.
Adjustment soft­
ware range
120 – 180
55° – 70°
Deactivated
Activated
App/remote Meaning
control adjust­
ment range
+/- 10 Resistance against flexion motion e.g. when
walking down stairs or when sitting down
+/- 3° Maximum flexion angle in the swing phase
0 - deactivated Activation/deactivation of the stance function.
1 - activated For switching with the cockpit app or remote
control, this function has to be activated in
the adjustment software. Further information
(see Page 75).
symbol, the symbol
Genium 3B1/3B1=ST