Otto Bock Genium Series Instructions For Use Manual page 104

Technical data
Product
Prox. system height up to alignment reference point
3B1-2=ST (threaded connector)
Minimum knee rotation point-ground measurement if the
2R20 and 1E57 are used
Minimum distal system height with 2R20 tube adapter
Minimum distal system height with 2R21 tube adapter
(with torsion)
Maximum distal system height with 2R20 tube adapter
Maximum distal system height with 2R21 tube adapter
(with torsion)
Range of Bluetooth connection to PC
Range of Bluetooth connection to remote control/mobile
device
Maximum possible flexion angle
Maximum possible flexion angle with preinstalled 4H100
flexion stop
Maximum possible flexion angle with 4H99 flexion stop
Maximum possible flexion angle with 4H103 flexion stop 112.5°
Maximum insertion depth of the tube adapter in the knee
joint
Weight of the prosthesis without tube adapter and Pro­
tective Cover
Tube adapter
Reference number
Weight
Material
Max. body weight
Protection rating
Approved set screws
Length
Reference number
Prosthesis battery
Battery type
Charging cycles (charging and discharging cycles)
after which at least 80% of the original battery capacity
remains available
Charge level after 1 hour charging time
Charge level after 2 hours charging time
Charge level after 4 hours charging time
Charge level after 8 hours charging time
Product behaviour during the charging process
Operating time of the prosthesis with new, fully charged
battery at room temperature
Power supply
Reference number
Storage and transport in original packaging
Storage and transport without packaging
104
26 mm
318 mm
298 mm
330 mm
514 mm
546 mm
max. 10 m/32 ft
max. 10 m/32 ft
135°
120°
127.5°
70 mm
approx. 1400 g / 3.09 lbs
2R20
190–300
g/0.42–0.66
lbs
150kg
IP67
10 mm 12 mm
506G3= 506G3=
M8x10 M8x12
Li-Ion
500
30 %
50 %
80 %
Fully charged
The product is non-functional
Approx. 5 days with average use
757L16*
-40 °C/-40 °F to +70 °C/+158 °F
-40 °C/-40 °F to +70 °C/+158 °F
10 % to 93 % relative humidity, non-condensing
2R21 (with torsion unit)
435–545 g/0.96–1.20 lbs
Aluminium
125kg
IP54
14 mm
506G3= 506G3=
M8x14
16 mm
M8x16