Information for changing the prosthesis settings
•
Before changing settings, always check the main menu of the Cockpit app to make sure the
correct component has been selected. Otherwise parameters could be changed for the
wrong component.
•
It is not possible to change prosthesis settings nor to switch to a different mode while the
prosthesis battery is being charged. Only the status of the prosthesis can be called up.
Instead of the
pit app.
•
The O&P professional's setting is in the middle of the scale. After making adjustments, this
setting can be restored by tapping the "Standard" button in the Cockpit app.
•
Prosthesis settings should be optimised using the adjustment software. The Cockpit app is
not intended for use by the O&P professional to set up the prosthesis. The everyday behaviour
of the prosthesis can be changed to a certain extent using the app (e.g. while becoming
accustomed to the prosthesis). The O&P professional can use the adjustment software to
track these changes at the next appointment.
8.6.1 Changing the prosthesis setting using the cockpit app
The following parameters can be modified:
INFORMATION
Number of parameters depending on selected activity mode
Some parameters are not available depending on the currently selected activity mode.
Parameter
Resistance
symbol, the
symbol appears in the bottom row of the screen in the cock
1) Once the component is connected and in the desired mode,
tap the icon in the main menu.
→ The navigation menu opens.
2) Tap the "Settings" menu option.
→ A list appears with the parameters for the currently
3) Change the setting of the desired parameter by tapping the
"<", ">" icons.
INFORMATION: The O&P professional's setting is
marked and, after the setting has been changed, can be
restored by tapping the "Standard" button.
Adjustment
software
range
120 to 180
selected mode.
Cockpit app
Meaning
adjustment
range
+/- 10 of the
Flexion resistance while sitting down,
configured
in the stance phase, while walking on
value
ramps and stairs.
79