Changing The Prosthesis Setting Using The Cockpit App; Overview Of Adjustment Parameters In Basic Mode - Otto Bock Genium 3B1-3 Instructions For Use Manual

• If the settings of a MyMode are to be modified, one must first switch to this MyMode.

9.2.1 Changing the prosthesis setting using the cockpit app

9.2.1.1 Overview of adjustment parameters in basic mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait cycle. These para­
meters act as basic settings for automatically adjusting the damping behaviour to the current motion situation (e.g.
ramps, slow walking speed, etc.).
The stance function, sitting function and/or stairs and obstacles function can also be activated/deactivated. Further
information on the stance function (see Page 34), sitting function (see Page 36), stairs and obstacles function (see
Page 36).
The following parameters can be modified:
Parameter
Resistance
Angle
Stance function
Sitting function
Stair Function
Genium 3B1-3/3B1-3=ST
1) Once the component is connected and in the desired mode, tap the
icon in the main menu.
→ The navigation menu opens.
2) Tap the "Settings" menu option.
→ A list appears with the parameters for the currently selected mode.
3) Change the setting of the desired parameter by tapping the "<", ">"
icons.
INFORMATION: The O&P professional's setting is marked and,
after the setting has been changed, can be restored by tapping
the "Standard" button.
Adjustment soft­ Setting range,
ware range app
120 – 180 +/- 10
55° – 70° +/- 3°
Deactivated 0 - deactivated
Activated 1 - activated
Deactivated 0 - deactivated
Activated 1 - activated
Deactivated 0 - deactivated
Activated 1 - activated
Meaning
Resistance against flexion motion e.g. when
walking down stairs or when sitting down
Maximum flexion angle in the swing phase
Activation/deactivation of the stance function.
For switching with the Cockpit app, this func­
tion has to be activated in the adjustment
software. Further information (see Page 34).
Activation/deactivation of the sitting function.
For switching with the Cockpit app, this func­
tion has to be activated in the adjustment
software. Further information (see Page 36).
Activating/deactivating the stair and obstacle
function. For switching with the Cockpit app,
this function has to be activated in the adjust­
ment software. Further information (see
Page 36).
Use
39