Cisco IP Phone Troubleshooting
Security Setup Fields
The Security Setup screen displays these items.
Table 32: Security Setup items
Item
Security Mode
LSC
Trust List
802.1x Authentication
Cisco IP Phone Web Page
Each Cisco IP Phone has a web page from which you can view a variety of information about the phone,
including:
• Device Information: Displays device settings and related information for the phone.
• Network Setup: Displays network setup information and information about other phone settings.
• Network Statistics: Displays hyperlinks that provide information about network traffic.
• Device Logs: Displays hyperlinks that provide information that you can use for troubleshooting.
• Streaming Statistic: Displays hyperlinks to a variety of streaming statistics.
This section describes the information that you can obtain from the phone web page. You can use this
information to remotely monitor the operation of a phone and to assist with troubleshooting.
You can also obtain much of this information directly from a phone.
Access the Phone Web Page
Note
If you cannot access the web page, it may be disabled by default.
Procedure
Step 1
Obtain the IP address of the Cisco IP Phone by using one of these methods:
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Description
Displays the security mode that is set for the phone.
Indicates whether a locally significant certificate (used
for the security features) is installed on the phone or
is not installed on the phone.
The Trust List is a top-level menu that provides
submenus for the CTL Signature and Call
manager/TFTP Server.
Allows you to enable 802.1X authentication for the
phone.
Security Setup Fields
169