Set Device Authentication Field - Cisco 3905 Administration Manual

Cisco Unified IP Phone Settings
Option
EAP-MD5
Transaction Status

Set Device Authentication Field

Procedure
Step 1 Choose Applications > Admin Settings > Security > 802.1X Authentication > Device Authentication.
Step 2
Press Select.
Step 3 Set the Device Authentication option to Enabled or Disabled.
Step 4 Press Select to confirm.
Description
Device ID: A derivative of the phone's
model number and unique MAC
address displayed in this format:
CP-<model>-SEP-<MAC>
Shared Secret: Choose a password to
use on the phone and on the
authentication server. The password
must be between 6 and 32 characters,
consisting of any combination of
numbers or letters.
Note If you disable 802.1X
authentication or perform a
factory reset of the phone, the
shared secret is deleted.
Realm: Indicates the user network
domain, always set as Network.
Displays the transaction status of your
802.1X Authentication.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Set Device Authentication Field
To Change
Device ID is not editable.
See Set Shared Secret Field, on page
To view the realm details of your 802.1X
Authentication, choose Applications >
Admin Settings > Security > 802.1X
Authentication > EAP-MD5 > Realm.
To view the transaction status of your
802.1X Authentication, choose
Applications > Admin Settings > Security
> 802.1X Authentication Status.
46.
45