Set Device Authentication Field; Set Eap-Md5 Shared Secret Field - Cisco 7975G Software Manual

802.1X Authentication and Status Menus
Table 35: 802.1X Authentication Status Menu Options
Option
802.1X Authentication
Status

Set Device Authentication Field

Procedure
Step 1 Choose Settings > Security Configuration > 802.1X Authentication > Device Authentication.
Step 2 Set the Device Authentication option to Enabled or Disabled.
Step 3 Press Save.

Set EAP-MD5 Shared Secret Field

See Cisco Unified IP Phone Security Problems, on page 222
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
118
Description
Real-time progress of the 802.1X
authentication status. Displays one of the
following states:
• Disabled: 802.1X is disabled and the
transaction was not attempted.
• Disconnected: Physical link is down
or is disconnected.
• Connecting: System is trying to
discover or acquire the authenticator.
• Acquired: Authenticator has been
acquired. System is waiting for
authentication to begin.
• Authenticating: Authentication is in
progress.
• Authenticated: Authentication was
successful or implicit authentication
occurred due to timeouts.
• Held: Authentication failed. System
is waiting before next attempt
(approximately 60 seconds).
Cisco Unified IP Phone Settings
To change
Display only. Cannot configure.
for recovery of a deleted shared secret.