PLANET ECLIPSE EGO TEN Operator's Manual page 45

traininG
tHe traininG Parameter
The training parameter is used to select
Training mode. in Training mode the Ego10
will function exactly the same as normal but
with two important differences:
1. The solenoid valve is not driven so the
bolt does not move and does not release a
burst of air. instead the beeper will sound
for each pull of the trigger. This simulates
the firing cycle without wasting air and generating lots of
noise.
2. The bbSS is overridden so that the Ego10 can cycle
without paint. The centre of the bbSS indicator changes to
a 'T' to indicate that Training mode is enabled.
The parameter choices are as follows:
training
> off: Training mode is disabled and the Ego10 functions
normally.
> on: Training mode is enabled.
> cancel: Cancel editing and leave the parameter
unchanged.
clocK
tHe clocK menu (selected models onlY)
The CLOCK menu allows the time and date on the Ego10's
internal clock to be adjusted.
time
tHe time Parameter
The parameter allows for adjustment
tiME
of the 24hr clock.
date
tHe date Parameter
The parameter allows for adjustment
DatE
of the day, month and year.
QuicK Guide
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO10
MENU TREE
ADVANCED SET-UP ADVANCED SET-UP
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
45.