PLANET ECLIPSE EGO TEN Operator's Manual page 39

semi sHots
tHe semi sHots menu
The parameter sets the number of shots
in semi-automatic that are required at the
rate before ramping will start. The
KiCK in
parameter can be set between 3 and 9 pulls
in 1 pull increments.
KicK in
tHe KicK-in Parameter
This parameter sets the minimum rate
at which the user has to pull the trigger
in order to start ramping. This parameter
can be set between 3.3 and 10.0 pulls per
second in 0.1 pulls per second increments.
sustain
tHe sustain rate Parameter
Once the Ego10 is ramping the user has to
continue to pull the trigger at a minimum
rate in order to maintain the ramping.
This parameter sets this rate and can be
between 3.3 and 10.0 pulls per second in
0.1 pulls per second increments.
restart
tHe ramP restart Parameter
The parameter defines the amount
rEStart
of time after the last trigger pull during
which the ramp can be restarted with a
single trigger pull. if a trigger pull occurs
after the time has expired, then the
rEStart
other ramp start conditions have to be met
before ramping will restart. This parameter
can be set between 0.0 and 1.0 seconds in
0.1 second increments.
timinG
tHe timinG menu
The parameters on the
tiMing
control of the solenoid valve (see overleaf).
menu all relate to the
QuicK Guide
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO10
MENU TREE
ADVANCED SET-UP ADVANCED SET-UP
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
39.