main menu
HardWare
32.
full
1.0 - 20.0 ms
Pull tm
3.0 - 25.0 ms
release tm
3.0 - 25.0 ms
Pull Pt*
51 - 99%
release Pt*
1 - 49%
bacK
triGGer
Opto
Switch
Cancel
sound
Off
On
Cancel
tones*
Off
On
Cancel
bacKliGHt
00 : 00 - 00 : 20
red leVel*
0 - 100%
Grn leVel*
0 - 100%
blu leVel*
0 - 100%
auX out
Off
On
Cancel
auto off
05:00 - 60:00
Time in milliseconds (ms) that a paintball must be in the breech for the Ego10 to be ready
to fire
Time in milliseconds (ms) that the trigger must be pulled for a shot to be fired
Time in milliseconds (ms) that the trigger must be released before a pull can be recorded
Percentage at which the trigger Opto sensor pull point is set (TriggEr dependant)
Percentage at which the trigger Opto sensor release point is set (TriggEr dependant)
return to Main menu
Use Opto sensor to detect trigger operation
Use micro-switch to detect trigger operation
Cancel trigger detection method selection
Turn off audible indicator
Turn on audible indicator
Cancel audible indicator selection
Turn off audible tone when any button is pressed (SOUND dependant)
Turn on audible tone when any button is pressed (SOUND dependant)
Cancel audible tone selection
Time in seconds that the backlight comes on for (00:00 = no backlight)
Percentage of red light in backlight (bACKlighT dependant)
Percentage of green light in backlight (bACKlighT dependant)
Percentage of blue light in backlight (bACKlighT dependant)
AUx socket output off
AUx socket output on
Cancel AUx socket selection
Time in hours and minutes after which the Ego10 automatically powers off
Need help?
Do you have a question about the EGO TEN and is the answer not in the manual?