PLANET ECLIPSE EGO TEN Operator's Manual page 19

t-slot mountinG
sYstem
The Ego10 utilises a T-slot arrangement to mount the OOPS
to the bottom of the frame. The T-slot is an improvement
over the dovetail mounting system found on most
paintball markers, and is much more able to withstand the
rigours of modern tournament paintball.
For backwards compatibility there are industry standard
mounting holes in the base of the frame for mounting third
party air source adaptors (ASAs).
t-slot
mount
macroline HosinG and
elboWs
To aid the longevity of your macroline hosing, it is very
important to remove it from (and install it back into) the
fittings in the correct manner:
Pull back the collet section of the macroline fitting and
keep the collet depressed.
Pull the macroline hose out of the macroline fitting and
release the collet.
before installing the macroline hose into the macroline
fitting ensure that the end has been trimmed correctly to
ensure a tight fit in the fitting.
WARNING
if You eVer remoVe tHe macroline Hose from
tHe fittinG, alWaYs cHecK tHe condition of
Your macroline HosinG and if it is Worn or tHe
WronG lenGtH rePlace it immediatelY.
QuicK Guide
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO10 USING YOUR EGO10
MENU TREE
ADVANCED SET-UP
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
19.