PLANET ECLIPSE EGO TEN Operator's Manual page 2

adHere strictlY to tHese and all otHer
01. Please read and understand all
instruction manuals before use.
The Eclipse Ego10 is not a toy. Paintball safetY
02.
rules must be folloWed at all times.
Careless or improper use, including failure to follow
03.
instructions and warnings within this User Manual and
attached to the Ego10 could cause death or serious
injury.
Do not remove or deface any warnings attached to
04.
the Ego10.
05. Paintball industry standard eye/face/ear and head
protection designed specifically to stop paintballs and
meeting ASTM standard F1776 (USA) or CE standard
(Europe) must be worn by user and any person
within range. Proper protection must be warn during
assembly, cleaning and maintenance.
Never shoot at a person who is not wearing proper
06.
protection.
Never look directly into the barrel of the marker.
07.
Accidental discharge into the eyes may cause
permanent injury or death. Never look into the barrel
or breech area of the Ego10 whilst the marker is
switched on and able to fire.
Keep the Ego10 switched off until ready to shoot.
08.
09. Treat every marker as if it is loaded and ready to fire.
The electronic on/off is the markers safety, always
10.
switch off the marker when not in use.
2.
safetY instructions and Guidelines!
WARNING
11. Always fit a barrel-blocking device to the Ego10 when
not in use.
Always remove all paintballs from the Ego10 when
12.
not in use on the field of play.
Never point the Ego10 at anything you do not intend
13.
to shoot.
14. Do not shoot at persons at close range.
15. Do not field strip or remove any parts white the
marker is pressurised.
16. Do not fire the Ego10 without the bolt in the breech,
as high-pressure gas will be emitted.
17. Do not fire the Ego10 without the bolt pin locked
securely in place.
Never put your finger or any foreign objects into the
18.
paintball feed tube of the Ego10.
19. Never allow pressurised gas to come into contact with
any part of your body.
20. Always remove the first stage regulator and relieve
all residual gas pressure from the Ego10 before
disassembly.
21. Always remove the first stage regulator and relieve
all residual gas pressure from the Ego10 for transport
and storage.
22. Always follow guidelines given with your first stage
regulator for safe transportation and storage.
23. Always store the Ego10 in a secure place.