Figure 52: Simulation Window With Contour View - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

12
Depiction as contour view
The simulation window displays a contour view. The contour view aids in the
precise positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):

Figure 52: Simulation window with contour view

1 Machining pattern (white)
2 Current block or machining position (green)
Tool contour, tool position and tool path (orange)
3
202
You can modify the colors and line thicknesses used in the contour
view.
Further information: "Simulation window", Page 231
Program run | Using the program
1 2
3
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020