Changing The Password; Steps For Commissioning - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

7
7.2.4

Changing the password

You must change the password to prevent unauthorized configuration.
The password is confidential and must not be disclosed to any other person.
7.3

Steps for commissioning

Prerequisite:
commissioning", Page 90).
Select the application
Selecting the Application
Basic settings
Activating the Software options
Setting the date and time
Setting the units of measure
Configuring a touch probe
Configuring a touch probe
92
Tap Settings in the main menu
Tap User
The logged-in user is indicated by a check mark
Select the logged-in user
Tap Password
Enter the current password
Confirm entry with RET
Enter the new password and repeat it
Confirm entry with RET
Tap OK
Close the message with OK
The new password is available the next time the user logs in
The following commissioning steps build on each other.
To correctly commission the product, make sure to perform the
steps in the order described here
You are logged on as a user of the OEM type (see "Logging in for
Commissioning | Logging in for commissioning
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020