HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 29

Safety | Personnel qualification
2.5 Personnel qualification
The personnel for mounting, installation, operation, service, maintenance and
removal must be appropriately qualified for this work and must have obtained
sufficient information from the documentation supplied with the product and with
the connected peripherals.
The personnel required for the individual activities to be performed on the product
are indicated in the respective sections of these instructions.
The personnel groups are specified in detail as follows with regard to their
qualifications and tasks.
Operator
The operator uses and operates the product within the framework specified for the
intended use. He is informed by the operating company about the special tasks
and the potential hazards resulting from incorrect behavior.
Qualified personnel
The qualified personnel are trained by the operating company to perform advanced
operation and parameterization. The qualified personnel have the required technical
training, knowledge and experience and know the applicable regulations, and are
thus capable of performing the assigned work regarding the application concerned
and of proactively identifying and avoiding potential risks.
Electrical specialist
The electrical specialist has the required technical training, knowledge and
experience and knows the applicable standards and regulations, and is thus
capable of performing work on electrical systems and of proactively identifying and
avoiding potential risks. Electrical specialists have been specially trained for the
environment they work in.
Electrical specialists must comply with the provisions of the applicable legal
regulations on accident prevention.
2.6 Obligations of the operating company
The operating company owns or leases the device and the peripherals. At all
times, the operating company is responsible for ensuring that the intended use is
complied with.
The operating company must:
Assign the different tasks to be performed on the device to suitable, qualified
and authorized personnel
Verifiably train the personnel in the authorizations and tasks
Provide all materials and means necessary in order for the personnel to
complete the assigned tasks
Ensure that the device is operated only when in perfect technical condition
Ensure that the device is protected from unauthorized use
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
2
29