Create The Matrix Icp Contour - HEIDENHAIN MANUALPLUS 4110 Manual

Create the "Matrix" ICP contour
Notes on the "Matrix" ICP contour:
The contour is described in the machining direction
First step: Input of the contour without form elements (rough contour)
Second step: Superimposition of the form elements (roundings)
Create an ICP contour:

Call the ICP editor:
Press the Edit ICP soft key

Press the Contour list soft
key

ICP Contour: 2
Enter the ICP contour
number

Press the Select soft key
HEIDENHAIN MANUALplus 4110 Surface Machining Example 8.11