Calculator; Setting The Feed-Rate Value; Additional Functions In Manual Operation Mode - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Basic operation | Status bar
6.10.4

Calculator

For calculations, the product provides various calculators in the status bar. To enter
the numerical values, use the numeric keys as on a normal computer.
Calculator
Standard
Speed calculator
6.10.5

Setting the feed-rate value

Setting the feed-rate value
For the Manual mode and MDI mode, you can set the feed-rate value in the Feed
rate dialog
6.10.6

Additional functions in Manual operation mode

The following operating elements are available:
Operating
element
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Function
Contains the most important mathematical functions
Enter the Diameter (mm) and Cutting speed (m/min)
in the provided fields
The speed is calculated automatically
Tap Feed rate on the status bar
The Feed rate dialog box appears
Enter the feed-rate value in the corresponding input field
For linear axes, use the mm/min input field
For rotational axes, use the °/min input field
Tap Close to close the dialog
The axes are moved at the entered feed-rate value
To call the additional functions, tap
the status bar
Function
Reference marks
For starting the reference mark search
Further information: "Activating the reference mark
search", Page 113
Probing
For probing the edge of a workpiece
Further information: "Defining presets", Page 172
Probing
For finding the centerline of a workpiece
Further information: "Defining presets", Page 172
Probing
For finding the center point of a circular feature (hole or
cylinder)
"Defining presets", Page 172
Further information:
in
Additional functions
6
83