Messages And Audio Feedback; Messages; Figure 24: Display Of Messages In The Workspace - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Basic operation | OEM bar
Programming spindle speed
6.12

Messages and audio feedback

6.12.1

Messages

1

Figure 24: Display of messages in the workspace

Message display area
1
2 Message list
The messages that appear at the top of the workspace are triggered by, for
example, operator errors or uncompleted processes.
The messages are displayed upon occurrence of the message cause or via tapping
on the Messages display area at the top left of the screen.
Viewing messages
3
Resizing the display area
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Tap or long-press + or – to bring the spindle to the desired
rotational speed
Press and hold the desired Spindle speed field on the OEM
bar
The background color of the field is highlighted in green
The product applies the current spindle speed as the nominal
value and displays it in the Spindle speed field
2
Tap Messages
The message list opens
To enlarge the message display area, drag the handle down
To make the message display area smaller, drag the handle
up
To close the display area, drag the handle up out of the
screen
The number of unclosed messages is indicated in Messages
6
85