Contouring Control With Drive System From Heidenhain - HEIDENHAIN MANUALplus 620 Manual

Contouring control with drive system from HEIDENHAIN

General information
•
MANUALplus 620 Contouring control for CNC and cycle lathes
•
Suitable for horizontal and vertical lathes as well as vertical
boring and turning mills
•
Up to 3 principal axes (X, Z and Y), B axis, closed-loop spindle
and counter spindle, C1/C2 axis and driven tools
•
5-axis simultaneous machining (X, Z, Y, B, and C axes)
•
Up to 3 programmable auxiliary axes (U, V, W) for control of
steady rest, tailstock and counter spindle
•
The position of a parallel secondary axis can be shown
combined with its principal axis
•
Compact design: Screen, keyboard and main computer all in one
unit
•
HEIDENHAIN inverter systems and motors recommended
•
Uniformly digital with HSCI interface and EnDat interface
•
12.1-inch TFT color flat-panel display
•
Data medium: CFR CompactFlash memory card (CFast):
•
Programming of turning, drilling and milling operations with
smart.Turn, according to DIN or via cycles
•
TURN PLUS for automated smart.Turn program generation
•
ICP free contour programming for turning and milling contours
•
For simple tool holders (multifix), turrets or magazines
System test Controls, motors and encoders from HEIDENHAIN are in most
cases integrated as components in larger systems. In these
cases, comprehensive tests of the complete system are required,
irrespective of the specifications of the individual devices.
In particular the following parts in controls from HEIDENHAIN are
Expendable parts
subject to wear:
•
Buffer battery
•
Fan
Standards (ISO, EN, etc.) apply only where explicitly stated in the
Standards
catalog.
Note Microsoft, Windows, Windows Vista and Internet Explorer are
registered trademarks of Microsoft Corporation.
Intel, Intel Core and Celeron are registered trademarks of Intel
Corporation.
The features and specifications described here apply for the
Validity
following control and NC software versions:
MANUALplus with NC software versions
548431-04 (no export license required)
This catalog supersedes all previous editions, which thereby
become invalid. Subject to change without notice.
Requirements Some of these specifications require particular machine
configurations. Please note also that, for some functions, a special
PLC program must be created by the manufacturer.
2