Restoring Files And Settings; Restore Oem-Specific Folders And Files - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

16
16.6

Restoring files and settings

You can restore saved files and settings to a device. The following sequence
should be followed when restoring files and settings:

Restore OEM-specific folders and files

Restore user files
Restore settings
An automatic restart of the product is performed only after the settings have been
restored.
16.6.1 Restore OEM-specific folders and files
Backed-up OEM-specific folders and files of the product can be loaded onto a
device. This allows you to restore the configuration of a device while restoring the
settings.
Further information:
If servicing becomes necessary, an exchange unit can thus be operated with the
configuration of the failed unit once the settings have been restored, provided that
both units use the same or compatible firmware versions.
Safely removing a USB mass storage device
288
Servicing and maintenance | Restoring files and settings
"Restore settings", Page 290
Tap Settings in the main menu
Open in succession:
Tap Service
Tap OEM area
Open in succession:
Back up and restore
Restore OEM specific folders and files
Tap Load as ZIP
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Navigate to the folder containing the backup file
Select the backup file
Tap Select
Confirm the successful transfer with OK
There is no automatic restart when the OEM-specific
folders and files are restored. A restart is performed
when the settings are restored.
Further information:
To restart the product with the transferred OEM-specific
folders and files, switch the product off and then back on
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message The storage medium can be removed now.
appears
Disconnect the USB mass storage device
"Restore settings", Page 290
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020