Back Up User Files - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Commissioning | Backing up data
Safely removing a USB mass storage device

Back up user files

7.10.2
The user files of the product can be backed up as a file to make it available after
a reset to the factory default settings. This, together with the backing up of the
settings, enables you to back up the complete configuration of your product.
Further information:
All files from all user groups that are stored in the respective folders are
backed up and can be restored as user files.
The files in the System folder are not restored.
Performing back up
The user files can be backed up as a ZIP file on a USB mass storage device or
connected network drive.
Further information:
Safely removing a USB mass storage device
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message The storage medium can be removed now.
appears
Disconnect the USB mass storage device
"Back up settings", Page 128
Tap Settings in the main menu
Tap Service
Open in the sequence
Back up and restore
Back up user files
Tap Save as ZIP
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Select the folder to which you want to copy the ZIP file
Specify a name for the ZIP file, e.g. "<yyyy-mm-dd>_config"
Confirm the entry with RET
Tap Save as
Tap OK to confirm successful backup of the user files
The user files were backed-up.
"Back up and restore", Page 272
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message The storage medium can be removed now.
appears
Disconnect the USB mass storage device
7
129