HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 142

8
Configuring operation with a mouse or touchscreen
The product can be operated either via the touchscreen or a connected (USB)
mouse. If the product is in its factory default setting, touching the touchscreen
deactivates the mouse. Alternatively, you can set that the product is operated
either only via the mouse or only via the touchscreen.
Requirement:
Further information:
You can modify the touch sensitivity of the touchscreen to allow operation under
special conditions (e.g. for operation with gloves).
Further information:
Configuring the USB keyboard
The factory default language for the keyboard assignment is English. You can
switch the keyboard assignment to the desired language.
Requirement:
Further information:
Further information:
142
A USB mouse is connected to the product.
"Connecting input devices", Page 55
Tap Settings in the main menu
Tap General
Tap Input devices
Select the desired option from the Touchscreen sensitivity
drop-down list
Select the desired option from the Mouse substitute for
multitouch gestures drop-down list
"Input devices", Page 232
A USB keyboard is connected to the product.
"Connecting input devices", Page 55
Tap Settings in the main menu
Tap General
Tap Input devices
Select the flag for the desired language from the USB
keyboard layout drop-down list
The keyboard assignment corresponds to the selected
language
"Input devices", Page 232
Setup | Single steps for setup
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020