Axis Name> (Settings Of The Axis) - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

15
15.5.11 <Axis name> (settings of the axis)
Path:
Further information:
Parameters
Axis name
Axis type
Encoder
Error compensation
250
Settings ► Axes ► <Axis name>
In order to use functions such as the execution of blocks, the
configuration of the axes must comply with the requirements of the
respective application.
"Fundamentals of axis configuration", Page 243
Explanation
Selection of the axis name displayed in the position preview
XYZ
The axis name S is displayed in the selection list once
you have selected Spindle, Gear spindle or Spindle
with orientation under Axis type.
Definition of the axis type
Settings:
Not defined
Axis
Axis + NC (possible for up to 3 axes): NC-controlled linear axis
or rotational axis
Coupled axis: Axis whose position value is offset against a
principal axis
Coupled axes do not appear in the position display.
The position axis shows only the principal axis
with the calculated position value of both axes.
For coupled axes, the product adapts the axis
name automatically. The axis name consists of
the name of the principal axis and the selected
calculation type, e.g. +X.
Spindle
Gear spindle
Spindle with orientation
Default value: Axis
Configuration of the connected encoder
"Encoder", Page 252
Further information:
Configuration of the linear error compensation LEC or segment-
ed linear error compensation SLEC
Further information: "Linear error compensation (LEC)",
Page 257
Further information: "Segmented linear error compensation
(SLEC)", Page 257
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Settings | Axes