Depiction As Contour View; Figure 47: Simulation Window With Contour View - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

MDI mode | Using the simulation window
11.4.1

Depiction as contour view

The simulation window displays a contour view. The contour view aids in the
precise positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):

Figure 47: Simulation window with contour view

1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool path (orange)
Activating the simulation window
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Tap Graphic-Position
The simulation window for the currently selected block
appears
Tap Graphic on the view bar to enlarge the simulation
window
The parameter view is hidden and the simulation window is
enlarged
1 2
3
11
193