Setting The Spindle Speed; Managing Programs; Opening A Program; Closing A Program - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

12
12.2.6

Setting the spindle speed

You can control the spindle speed depending on the configuration of the
connected machine tool.
12.3

Managing programs

To run a program, open the program file, which must be of the *.i type.
12.3.1

Opening a program

12.3.2

Closing a program

204
To switch from the display of the spindle speed to the input
field (if required), drag the display to the right.
The Spindle speed input field is displayed
Tap or long-press + or – to set the spindle speed to the
desired value
or
Tap the Spindle speed input field
Enter the desired value
Confirm entry with RET
The product applies the entered spindle speed as the
nominal value and controls the spindle of the machine tool
accordingly
To return to the display of the spindle speed, drag the input
field to the left
If no entry is made in the spindle speed input field for three seconds,
the device switches back to the display of the current spindle speed.
The default storage location for programs is Internal/Programs.
Tap Open program in the program management
Select the storage location in the dialog, e. g.
Internal/Programs or USB mass storage device
Tap the folder containing the file
Tap the file
Tap Open
The selected program is loaded
Tap Close program in the program management
The opened program is closed
Program run | Using the program
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020