Figure 55: Installing The Power Cord Retaining Clip On The Pwr300 Power Supply; Figure 56: Connecting The Ac Power Cord - Allied Telesis x320 Series Installation Manual

Chapter 8: Powering On the Switch
97
Figure 55. Installing the Power Cord Retaining Clip on the PWR300 Power
2. Connect the AC power cord to the AC power connector on the front
panel of the PWR300 power supply. Refer to Figure 56.
Figure 56. Connecting the AC Power Cord
3. Lower the power cord retaining clip to secure the cord to the x320-
10GH switch. Refer to Figure 57 on page 98.
Supply