Table 4: Leds For Ports 1 To 8 On The X320-10Gh Switch - Allied Telesis x320 Series Installation Manual

20
Table 4. LEDs for Ports 1 to 8 on the x320-10GH Switch
LED State
Solid Green
Flashing
Green
Link/
Activity
Solid Amber
LED
Flashing
Amber
Off
Green
Solid Amber
Flashing
Amber
PoE
Off
Description
A port has established a 1000Mbps link to a
network device.
A port is transmitting or receiving data at
1000Mbps.
A port has established a 10Mbps or
100Mbps link to a network device.
A port is transmitting or receiving data at
10Mbps or 100Mbps.
A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly command in the management
software.
The switch is detecting a powered device
on the port and is delivering power to it.
The switch has shutdown PoE+ on the port
because of a fault condition.
The switch is detecting a powered device
on the port, but is not delivering power to it
because it has reached its maximum power
budget.
This LED state can result from the following
conditions:
- The port is connected to a non-PoE
device.
- The port is connected to a PoE device
that is powered off.
- The port is disabled in the management
software.
- PoE is disabled on the port.
- The LEDs on the Ethernet line cards are
turned off. To turn on the LEDs, use the
eco-friendly command in the management
software.
x320 Series Installation Guide