Installing The Device With The Brackets; Figure 20: Device Orientation With The Front Panel Facing The Front Of The Equipment Rack - Allied Telesis x320 Series Installation Manual

Installing the
Device with the
Brackets
The Rack Mount Kit brackets are shown in Figure 10 on page 45.
You can install the device in one orientation, with the front panel flush with
front of the equipment rack. The illustration in Figure 20 shows the device
orientation with the front panel facing the front of the equipment rack.
Refer to "19-Inch Rack Mount Kit" on page 45 to for the correct set of holes
to use for the device you are mounting.
Figure 20. Device Orientation with the Front Panel Facing the Front of the
If you have not chosen an orientation for the device in the equipment rack,
review "Device Orientations in the Equipment Rack" on page 57.
Please review the installation guidelines in "Choosing a Site for the Switch"
on page 42 before installing the device in an equipment rack.
Caution
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack.  E28
Equipment Rack
x320 Series Installation Guide
58