Table of Contents
Advertisement
Chapter 4: Installing the Device in an Equipment Rack
59
To install the device in a 19-inch equipment rack with the brackets,
perform the following procedure:
1. Place the device on a level, secure surface.
2. Attach the short L bracket to one side of the device and the long L
bracket on the other side of the device using the eight M4x6 mm
screws included with the unit. Refer to Figure 21
Figure 21. Attaching the Brackets to the Device
3. Attach the long L bracket to the straight bracket. The illustration in
Figure 22 shows the installation of the brackets such that the front
panel of the device is even with the front of the equipment rack. Refer
to "19-Inch Rack Mount Kit" on page 45 to for the correct set of holes
to use for the device you are mounting.
Figure 22. Attaching the Bracket Extension to the Device
Advertisement
Table of Contents
