Figure 29: Securing The Device To The Rkmt-J15 Bracket; Figure 30: Sliding In The Bracket Tray - Allied Telesis x320 Series Installation Manual

Chapter 4: Installing the Device in an Equipment Rack
5. Install two M4x6mm screws included with the RKMT-J15 to secure the
device to the bracket. Refer to Figure 29.
Figure 29. Securing the Device to the RKMT-J15 Bracket
6. To install a second device in the bracket, repeat steps 4 to 5.
7. Slide in the bracket tray. Refer to Figure 30.
Figure 30. Sliding in the Bracket Tray
65