Verifying The Poe Budget; X320-10Gh - Allied Telesis x320 Series Installation Manual

Verifying the PoE Budget

x320-10GH

This procedure explains how to verify the PoE budget on the
x320-10GH switch. The budget is the maximum wattage the switch has
available for the powered devices on its twisted pair ports. The budget for
x320-10GH should be 240W for each power supply that meets the
specifications in "PWR300 Power Supply" on page 22.
The procedure assumes you have already started a local management
session on the device. For instructions, refer to "Starting a Local
Management Session" on page 100.
To confirm the PoE budget, perform the following procedure:
1. Enter the ENABLE command at the User Exec mode to move to the
Privileged Exec mode, as shown here:
awplus> enable
awplus#
2. Enter the SHOW POWER-INLINE command at the Privileged Exec
mode prompt, as shown here:
awplus# show power-inline
3. Examine the Nominal Power field in the command output.
It should be 240W, 480W, or 720W depending on the number of power
supplies that are connected. This is the maximum PoE budget for the
powered devices on the ports of the x320-10GHswitch.
display the status of each
To
SYSTEM ENVIRONMENT command.
power supply, u
PWR300
x320 Series Installation Guide
se the SHOW
102