Ports 1 To 8; Specifications; Table 2: Specifications For Ports 1 To 8 On The X320-10Gh Switch - Allied Telesis x320 Series Installation Manual

Ports 1 to 8

Specifications

18
The following sections describe twisted pair ports 1 to 8 on the x320-10GH
Switch.
The basic specifications are listed in Table 2.
Table 2. Specifications for Ports 1 to 8 on the x320-10GH Switch
Specification
Port Speed
Duplex Mode
Maximum Distance
Power over Ethernet
Power Budgets
PoE Wiring Mode
Connector
Description
10/100/1000Mbps
You can set port speed with Auto-
Negotiation or manually. The default port
setting is Auto-Negotiation.
Half- or full-duplex
100 meters (328 feet)
PoE++ (IEEE 802.3bt) with 90 watts
maximum per port
Possible budgets are listed here:
- 240W with one PWR300 power supply
- 480W with two PWR300 power supplies
- 720W with three PWR300 power
supplies
Type 4
8-pin RJ-45
x320 Series Installation Guide