Table 10. Port 1 to 8 Worksheet for the x320-10GH Switch (Continued)
Port
Device/Location
8
32
PoE Device -
Yes/No
The columns in the table are described in Table 11.
Table 11. Worksheet Column Descriptions
Column
Port
Device/Location
PoE Device - Yes/No
PoE Class 0 to 8
Maximum Watts of PoE Class
Priority (Low, High, or Critical)
Maximum
PoE Class
Watts of PoE
0 to 8
Class
Total PoE
Watts
This is the physical ports on the
switch.
Enter the product name of the
network device connected to the
port, and its physical location.
Indicate whether the network
device is a powered device by
entering Yes or No.
For a powered device, enter its
PoE Class. This can be found in its
installation or user documentation.
Enter the maximum power output
(watts) from a switch port for the
Class of the device. For example, if
a port is connected to a Class 2
powered device, you enter 7W in
this column. Refer to Table 3 on
page 19.
Enter the priority level to be
assigned the port. The default is
Low.
x320 Series Installation Guide
Priority
(Low, High,
or Critical)
Description