Table of Contents
Advertisement
You can also install the device in an equipment rack with the optional
RKMT-J15 bracket. The bracket lets you install two devices side-by-side.
Refer to Figure 18 on page 56.
Note
When mounting using the RKMT-J15 Bracket, you must leave 1 rack
unit (1U) of space between brackets.
Figure 18. x320-10GH Switch and PWR300 Power Supplies in the RKMT-
Note
The RKMT-J15 Bracket is purchased separately.
For installation instructions refer to "Installing the Device in an Equipment
Rack with the RKMT-J15 Bracket" on page 62.
J15 Bracket
x320 Series Installation Guide
56
Advertisement
Table of Contents
