Installing The Device On A Din Rail; Figure 35: Orientation Of The Device On A Din Rail; Figure 36: Pressing Down On The Spring-Loaded Lever - Allied Telesis x320 Series Installation Manual

Chapter 5: Installing the Device on the DRMT-J03 DIN Rail

Installing the Device on a DIN Rail

Figure 35 shows the proper orientation of the device on a DIN rail. Do not
install the device horizontally or upside-down.
Figure 35. Orientation of the Device on a DIN Rail
To install the device on a DIN rail, perform the following procedure:
1. Press down the spring-loaded lever. Refer to Figure 36.
Figure 36. Pressing Down on the Spring-Loaded Lever
71